1. A 3/16" (Approx.) gap should be visible between the flat part of the actuator arm assembly and the gas pedal.

2. Front to Back.

The adjustable slide of the actuator arm should be parallel, with the gas pedal

3. Actuator Arm Adjustment

For gas pedals with a pivot: the roller should be located above and close to the pivot

(roller must not be located even with, or below, the gas pedal pivot point).

(roller must not be located even with, or below, the gas pedal pivot point).

For solid gas pedals (no pivot), the roller should be located between the top 1/2 and 3/4 of the gas pedal.